The picture shows
WC fixture Triomont XS

Description
The fixture is only 380 mm wide, enabling it to be fitted even in corners and smaller spaces. For corner installation, simply supplement with corner mountings. The fixture is supplied with protective covers for tiling work. No tools are required to service or replace the float or flush valve. The shut-off valve is easy to access in the cistern, behind the wall flush button. The depth of the fixture can be adjusted between 140 and 200 mm. The height of the WC bowl can be adjusted between 410 and 610 mm for a comfortable seat height. On delivery the flushing capacity is set at 6/3 liters for double flushing and 6 liters for single flushing. It is easy to adjust the setting to 7.5/4 liters double or 7.5 liters single flushing.

Logistics
Weight with packaging 14 kg

Complementary information
All our WC bowls are suited for combination with the Triomont XS. See the respective page of the catalog for WC bowls

Included in delivery:

WC fixture with wall mounting kit

Complete flush cistern insulated against condensation with flushing fittings and shut-off valve.

Connection components for drainage and water supply (pipe-in-pipe)

Drain bend, weldable according to EN 1519

Lead-in sleeve 18-28 mm

Fixtures for WC bowl

Hole template in blue plastic for front cover

Protection plugs in yellow plastic for pipe ends

Mounting template

Lower wall mounting as alternative to floor fitting

Screws and plugs for fitting to floor

Insulation protection between WC bowl and wall

Installation instructions

Montage
Install according to supplied installation instructions. The fixture can also be installed in a corner, when complemented with corner mountings. To avoid making holes in the floor sealing layer, optional lower wall mounting accessories are included in the standard delivery. The water supply can be connected from above or from the left side of the cistern. Extra long waste pipe/flush pipe for thick walls as standard. The flush cistern is ready for pipe-in-pipe connection. Can be connected to a 110 or 90 mm size waste system. Eccentric reducer 90/110 mm supplied. The waste bend is easily attached and is easily rotated depending on whether the connection is made to the left or right of the fixture. Note that a secure wall is required between the fixture and the WC bowl to prevent damage to the outer surface of the wall.