The picture shows
Bathtub 1708 with half front frame of oak laminate.

Description
The ARTic bathtub has been specially introduced to match our porcelain range of the same name. The tub has a strong collar, is extra deep and designed to be installed with design front frames. The bathtub is made of enameled steel plate and has a new "pop-up" type waste fitting, which is operated by pressing it, and therefore does not require a cable or chain. The frame is made of powder-coated aluminum and has feet with 25 mm of adjustment. The frame is supplied with a half front made of oak laminate. Order extra fronts and ends according to the number of visible sides.

Approval & standards
The product follows AMA recommendations as well as SS-EN 232.

Logistics
The bathtub is transport-protected on pallets with up to 8 tubs per pallet. For weights, see the table below. The pallet weighs 16 kg. Complete frames with a front are supplied packed together in a box. Extra fronts and ends are supplied in separate boxes.

Components Connection
Bathtub water volume 139 liters.

Montage
The front frame is installed on a frame and placed in position. The frame is adjusted horizontally using the adjustable feet. Install the waste fitting and the waste pipe on the tub. Place the bathtub, which is equipped with damping/friction material in the corners, in the frame. The plastic waste pipe is cut and connected to the floor well. Installation instructions are included.