The picture shows
WC Nordic 2320 for wall installation in white C+. With 2/4 liters double flushing and hard seat.

Approval & standards
CE approved and Nordic Quality certified. Product follows AMA recommendations, SS-EN 34 dimensioning and SS-EN 997 function. "Säker vatteninstallation" compliant.

Logistics
29 kg with packaging without seat. Seat weights: standard seat 1 kg,  hard seat with stainless steel mountings 3 kg.

Components Connection
Float valve: GB with shut-off valve connection R1/2" external thread. The waste fitting has button controlled half and full flushing (double flushing). Set at 2.4/4.2 liters on delivery. Alternatively with button controlled cistern valve for single flushing set at 4 liters.

Complementary information
Can be supplemented with: Fixture 382 57 50 – see page XXX. Raised or non-chromed button - see page xxx. Wooden seat - see page xxx.

Montage
Installed on bolts against wall. Washers, gaskets and nuts (M12) supplied, but not bolts. Bolt protrusion from prepared wall must be 50 ± 2 mm. Plastic connector for drain connection, rubber bellows and hose clamp are supplied. See supplied installation instructions and installation kit for relevant WC seat. For installation on weak walls, Gustavsberg’s fixture SRS 382 57 50 is recommended. According to the AMA the seat height should be 450 mm which corresponds to a c-c dimension between the existing floor and the center of the waste of 280 mm.