The picture shows
WC Nordic 2320 for wall mounting in white. With 6 liters flushing and black seat with stainless steel mountings.

Description
The WC is equipped with components which make it suitable for installation in public buildings – cistern cover in 1.5 mm stainless steel sheet with durable button controlled single flushing and hard wc seat with stainless steel mountings.

Approval & standards
CE approved and Nordic Quality certified. Product follows AMA recommendations, SS-EN 34 dimensioning and SS-EN 997 function. "Säker vatteninstallation" compliant.

Logistics
29 kg with packaging without seat. Weight seat: hard seat with stainless steel mountings 3 kg.

Components Connection
Float valve: GB with shut-off valve connection R1/2" external thread. The waste fitting has button controlled single flushing set at 6 liters.

Complementary information
Can be supplemented with: Fixture 382 57 50 – see page XXX.

Montage
Installed on bolts against wall. Washers, gaskets and nuts (M12) supplied, but not bolts. Bolt protrusion from ready wall must be 50 ± 2 mm. Plastic connector for drain connection, rubber bellows and hose clamp are supplied. See supplied installation instructions and installation kit for relevant WC seat. For installation on fragile walls, Gustavsberg’s fixture SRS 382 57 50 is recommended According to the AMA the seat height should be 450 mm which corresponds to a c-c dimension between the existing floor and the center of the waste of 280 mm.