(
|
Article Id :
GB1146510101
GB1146510101
EAN Code :
7391530058610
7391530058610
The picture shows
Washbasin ARTic 655 x 490 mm with Skandic, Pin washbasin mixer (mixer not included in the delivery).
Logistics
22.5 kg with packaging.
Components Connection
The washbasin is prepared for three hole mixer. The two extra holes are knocked out by the installer.
Montage
Installed from above in bench with sawn-out hole. To determine where to make holes in the bench, the washbasin is used as a template. Turn the washbasin upside down, draw around the contour of the washbasin and then saw 25 mm inside the line. Apply a bead of wet room silicon around the cut-out and lower the washbasin. Screw installation is not required. The rear edge of the washbasin is flat but not glazed as it is designed to be installed against a wall. Installation instructions supplied.
Washbasin ARTic 655 x 490 mm with Skandic, Pin washbasin mixer (mixer not included in the delivery).
Logistics
22.5 kg with packaging.
Components Connection
The washbasin is prepared for three hole mixer. The two extra holes are knocked out by the installer.
Montage
Installed from above in bench with sawn-out hole. To determine where to make holes in the bench, the washbasin is used as a template. Turn the washbasin upside down, draw around the contour of the washbasin and then saw 25 mm inside the line. Apply a bead of wet room silicon around the cut-out and lower the washbasin. Screw installation is not required. The rear edge of the washbasin is flat but not glazed as it is designed to be installed against a wall. Installation instructions supplied.
|
